ATS Acquisition Module
- Small, ruggedized enclosure with wall mount brackets (DIN rail optional)
- Hi speed data communication using CAN2.0 interface for M2M communication
- 11 channels ADC having sampling speeds up to 10ksps
- Small form factor with waterproof NEMA enclosure option
- Accessible without a public IP
- Monitors and assess the state of state of Rectifiers by monitoring the voltage and current of batteries as well as the total load of Rectifier
- Fully scalable architecture to monitor new Rectifier installations without modifying the current installations
- Wide AC and DC input voltage range
- Optional data logging capabilities
- 4 Digital I/O , 2RS232 ports, TCP access (RS422, RS485 option)
- Configurable for standalone ATS Monitoring System with GSM/GPRS/Ethernet/CDMA connectivity.
- Online and offline data storage option
- Enhanced security for public internet connections using VPN, SSH, AAA
- Programmable alert notifications and alarms
- Industrial grade solution for use in demanding and tough environments
- 4kV ESD protection between Analog front end and Processor Core.
- Complete Isolation between Analog front end and processor core preserving signal integrity and reducing noise
- MOVs to protect against high voltage impulses
| Parameter | Operating conditions | Min | Typical | Max | Unit |
| Operating Voltage | – | 12.5 | 13.5 | 17 | Volts |
| Power consumed | 1.5 | 1.5 | 1.9 | Watts | |
| Number of Temperature Sensors | – | – | 1 | – | Units |
| Temp Measurement Range | 0°C to +100°C | 0°C | – | +100°C | °C |
| Thermometer accuracy | 0°C to +100°C | ±0.2 | ±0.5 | ±1 | °C |
| ATS Phase Voltages(3 phase, 4 Wire) | 0 | 220 | 400 | VAC | |
| Voltage measurement accuracy | 0°C to +100°C | – | 0.01 | – | VAC |
| ATS State Grid | 170 | 220 | 400 | VAC | |
| ATS State Generator | 170 | 220 | 400 | VAC | |
| ATS Phase Currents | 0 | – | 800A | ACI | |
| Current measurement accuracy | 0°C to +100°C | – | 0.01 | – | Amp (AC) |
| ADC Resolution | – | – | 10 | – | Bits |
| ADC Frequency | – | – | 500 | 8000 | KHz |
| UART M2M communication | – | – | 9600 | – | Bps |
| CAN Bus M2M communication | – | – | 125000 | – | Bps |
- EN55024: 1998+A1:2001+A2:2003
- IEC61000-4.2:1995 ESD 8kV Air Discharge
- (Direct), 4kV Contact Discharge (Direct/Indirect)
- IEC61000-4.3:1995 Radiated Immunity 3.0 V/m, 1kHz, AM Sine Wave at 80%
- IEC61000-4.5: 1995 Surge Immunity 1.0kV Common Mode, 1.0KV Differential Mode
- IEC61000-4.11: 1994 Voltage Dips and interrupts (>95%, 0.5periods), (30%, 25 periods),(>95%, 250 periods)
- IEC61000-4.6: 1996 Conducted Immunity 3.0Vrms, 80% AM modulated (1kHz)
- ROHS
- CE (2011/65/EU)
- Serial Port: 4kV ESD protection on Serial and CAN Transceivers
- Optional Chassis ground for signal integrity (Applicable for Metal casing models only)